Painting Resin Statues

Painting Resin Statues: Ultimate How To Guide

Painting Resin Statues – Step By Step Guide

Painting resin statues or sculptures are a popular hobby among the young and old. What makes the hobby so popular is its flexibility and endless options. These statues are available in a broad range of sizes and shapes. While some people enjoy painting Celtic Gods, others enjoy painting angelic figures.

The options are endless, which is the driving force behind the popularity of the hobby. Below, you will discover an in-depth guide on painting resin statues.

About Resin

Painting on certain surfaces is much easier than others. If you’ve purchased a canvas, there is a good chance that it has been prepared for you. It’ll already have the necessary primer. Therefore, you can take it home and start painting on it immediately. This is likely not the case with a resin statue.

Resin is similar to plastic and this means that you’ll need to prepare the surface correctly before moving forward. If you do not, your paint job isn’t going to last long.

With proper preparation, the paint will last for many years to come. Below, you will find out how to prepare the statue’s surface to ensure that the paint will adhere to it and stick around for many years to come.

[Related Article: Painting Concrete Statues

What You Need

Before you can get started, you’ll want to collect a few supplies. The most important thing to remember is that you’ll need to prepare the surface in advance. Otherwise, the paint will not adhere to the material or it may peel off in the future. With this in mind, you’re going to need some soap. Mild dish soap will do the trick. You should also purchase sponges, a toothbrush, and a craft knife.

It is a good idea to obtain some fine-grit sandpaper, some newspapers, primer, and paints. You’ll also need some water but you should already have that at home. Once you’ve obtained these things, you’ll be ready to begin.

Sanding

The first step of the process involves sanding. This step is crucial because it removes any imperfections that will alter the aesthetics of the resin piece. If necessary, you can utilize a craft knife to remove thick ridges or seams. If you do utilize a craft knife, you will need to follow up with fine-grit sandpaper to ensure the surface is smooth and even. Otherwise, utilize fine-grit sandpaper to smooth down the excess resin and seams.

Preparation

The second step of the process involves preparing the surface for the primer. This step is very simple and will only require cool water, dishwashing detergent, a sponge, and a dry towel. Place the resin statue in the warm water with dishwashing determine. Utilize the sponge to scrub away the resin debris. You can repeat this step if you feel it is necessary.

Rinse the resin statue under cool tap water and dry thoroughly with a towel. To ensure the primer sticks, it is recommended to allow the piece to air dry for at least 30 minutes before priming.

Prepare Your Work Area

Primer is one of the most difficult substances to remove. So, to avoid permanent damage to your work area, you should cover it with a cardboard box. You can also utilize plastic sheeting or an old shower curtain if you have it on hand.

Whatever material you decide to utilize to protect the surface of your work area, you should secure it down with masking tape. This will help keep the material in place, so it does not move around and make a mess.

Prime The Statue

Before you can begin painting the statue, you’ll need to prime it. If you do not, there is a good chance that the paint will peel off at some point. Thankfully, you should be able to buy a primer at your local hardware store. If you can’t find it there, you’ll need to visit an arts and crafts store.

Once you’ve bought a can, you’ll need to shake it thoroughly. It is best to shake the can for one or two minutes. Then, it is time to begin spraying it.

Remember to work in small, even strokes. The can should be kept 12 or 18 inches away from the statue at all times. Starting above the statue and working your way downward is wise. Remember to end below the statue too.

This will ensure that you’re able to get a consistent finish without leaving anything behind. Once you’ve finished, you’ll need to give the primer enough time to dry.

Then, you can prime the other side of the statue. Again, let it dry completely. After that, it is time to grab your paints and brushes. The fun is about to begin.

Painting The Statue

Once you’ve finished, you’ll want to go ahead and start painting the statue. Remember that you’ll need to use the right type of paint. For this purpose, you should try obtaining a paint that is designed for plastic. Alternatively, you can use acrylic paint. Acrylic paint is a good choice since it can be washed off with water. On top of that, it will dry very quickly. You’ll also need to use an artist’s brush. This will ensure that you’re able to get the fine details.

Paint Carefully

It is pertinent to be very cautious when painting the statue. One mistake people make is using multiple colors at once. This is going to create problems and it might cause the colors to blend. For instance, your blues and yellows will transform into green when blended.

With this in mind, you should stick with a single color at once. Clean the brush thoroughly and let the paint dry before moving to the next color.

Look at the statue and find out which color is predominant. Start with that color and let it dry. Then, you can add secondary colors. This will prevent the colors from becoming muddy or transforming into something else entirely.

Finish The Last Details

Painting Resin Statues

Thankfully, you’re working with acrylic paint. This means that the paint is going to dry very quickly. This ensures that you’ll be able to get the project completed quickly. With oil paints, it would take forever for the paint to dry. Therefore, the project would be drug out for several days. With acrylic paints, you can guarantee that the paint will be completely dried to the touch in twenty or thirty minutes.

Once you’ve filled in the big portions, you can start working on the small details. For instance, you can use black to color in the lines around the fish’s scales. Or, you can use blue to finish the eyes. Either way, you should leave the fine details for last. And, you shouldn’t start on them until the rest of the paint has dried. Otherwise, you’ll end up with colors that do not match.

Summary

All in all, painting a resin statue isn’t too tough. However, you need to jump through several hoops in advance. After all, you are painting on a surface that is similar to plastic. If the surface is not properly prepared, there is a risk that the paint will peel off in the near future. Or, it may not stick to the surface at all.

These are problems that you’ll want to avoid. Make sure that the piece is cleaned thoroughly and properly prepared in advance. As long as you do that, you can guarantee that your painted resin statue will look amazing.

  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  

Leave a Comment

Your email address will not be published. Required fields are marked *